copy of Ats Pvc 503 Boots
Ats Pvc 503 Boots


Qty

Product Comments

There is no comment for this product

Descripción

  • DESCRIPTION: PANTANERA BOOT
  • GENERAL: COUNTER FOR ENHANCED PROTECTION AND EASE TO HEEL BOOT mismatching TOP OF REED WITH GROOVE SYSTEM ON BOTH SIDES FOR EASE OF GRIP
  • COLOR: OF THE ASSEMBLY OF THE CANE AND THE CAPELLATION IS BLACK / THE COLOR OF THE SOLE OF THE BOOT IS BEIGE.
  • HEIGHT: CORRESPONDS TO THE TYPE OF HIGH ROD BOOT WITH AVERAGE RANGE OF 359 mm.
  • HEEL AND SOLE: HEEL WITH HEIGHT OF 26 mm +/- 2mm. OUTSOLE WITH A RELIEF DESIGN THAT OFFERS ANTI-SLIP EFFECT.
  • CAPELLADA: REINFORCED WITH RELIEF, LIKE THE COUNTERFURT ROD: WITH TAPE IN TOP PARTS OF 2.8 mm, TO AVOID TEARING; REINFORCEMENT IN REAR OF 22.9 mm.
  • DESIGN AND MATERIALS: ERGONOMIC DIRECT INJECTION PVC (polyvinyl chloride), HIGH
  • RESISTANCE AND GREAT FLEXIBILITY; 100% WATERPROOF; NON-PLEATED NYLON INNER STOCKING
  • TECHNICAL DATA: - HEEL AND OUTSOLE WITH RESISTANCE TO 118 mm3 ABRASION - RESISTANCE TO
    BENDING AT 150,000 CYCLES OF 9.93 mm
    -HARDNESS (SHORE A-15 sec): a) IN THE UPPER OF 62.8 b) IN THE OUTSOLE OF 63.5
    - DENSITY IN g / cm3: a) IN THE UPPER OF 1.18 b) IN THE SOLE OF 1.12
    - RESISTANCE TO THE EXTRACTION OF OILS BY SOLVENTS (UPPER AND SOLE):
    A) MASS LOSS IN GASOLINE (%): a) 0.07 CANE b) 0.01 SOLE
    B) LOSS OF MASS IN VEGETABLE OIL (%): a) CANE OF 0.0 b) SOLE OF 0.0
    C) LOSS OF MASS IN MINERAL OIL (%): a) CANE OF 0.0 b) SOLE OF 0.0
    D) LOSS OF MASS IN WATER-SOAP (%): a) CANE OF 0.0 b) SOLE OF 0.0
    - AIR LEAKS: NO EVIDENCE OF AIR LEAKS
    - THERMAL STABILITY: NO DEFORMATION OR APPARENT DAMAGE
    - TENSION PROPERTIES FOR THE ROD:
    a) ELONGATION 4.76 Mpa (Standard requirement: Min 1.5)
    b) ELONGATION TO BREAKAGE (%) of 420.72 (Requirement of the standard: Min 170)
    - SOLE AND UPPER ADHESION N / cm of 61.03 (Requirement of the standard No less than 30)


METMAX