English
Español CO
-
-
-
-
- Products
-
-
- Products
-
-
-
- Brands
-
-
-
-
- Products
-
-
- Doctors and Hospitals
- Products
-
-
-
-
-
- Aluminized Products
-
-
-
- Confined Spaces
- Products
-
-
10 other products:
Monoglasses Top Gun In-Out Af Ansi Z87 +
Glasses for visual protection in polycarbonate, used as primary protection of
according to OSHA recommendations. Suitable for outdoor and indoor work,
designed to protect against high...
Refrigerador Haier HBC–80
Haier HBC-80 E003 / 089 Mains-Powered Ice-Lined Refrigerator for Vaccine Storage Ambient Operating Temperature: min. + 5 ° C, max. + 43 ° C Net vaccine storage volume: 61 L Supplied with voltage regulator and temperature control device.
Hearing Protector Headband Type Peltor Cup 3m 25 Db Optime 98 Ref H9a
- Always use protectors with clean hands.
- Put on protectors before entering the work area.
- Do not remove guards in work area.
- Follow the...
Monogafa X5 Claro Af + Elastic Band Ansi Z87 +
Eye protection glasses, used as primary protection according to OSHA recommendations. Suitable for indoor and outdoor work, designed for
protect against high and low speed impacts.
...
Product Comments
image Featured Descripción
- DESCRIPTION: PANTANERA BOOT
- GENERAL: COUNTER FOR ENHANCED PROTECTION AND EASE TO HEEL BOOT mismatching TOP OF REED WITH GROOVE SYSTEM ON BOTH SIDES FOR EASE OF GRIP
- COLOR: OF THE ASSEMBLY OF THE CANE AND THE CAPELLATION IS BLACK / THE COLOR OF THE SOLE OF THE BOOT IS BEIGE.
- HEIGHT: CORRESPONDS TO THE TYPE OF HIGH ROD BOOT WITH AVERAGE RANGE OF 359 mm.
- HEEL AND SOLE: HEEL WITH HEIGHT OF 26 mm +/- 2mm. OUTSOLE WITH A RELIEF DESIGN THAT OFFERS ANTI-SLIP EFFECT.
- CAPELLADA: REINFORCED WITH RELIEF, LIKE THE COUNTERFURT ROD: WITH TAPE IN TOP PARTS OF 2.8 mm, TO AVOID TEARING; REINFORCEMENT IN REAR OF 22.9 mm.
- DESIGN AND MATERIALS: ERGONOMIC DIRECT INJECTION PVC (polyvinyl chloride), HIGH
- RESISTANCE AND GREAT FLEXIBILITY; 100% WATERPROOF; NON-PLEATED NYLON INNER STOCKING
TECHNICAL DATA: - HEEL AND OUTSOLE WITH RESISTANCE TO 118 mm3 ABRASION - RESISTANCE TO
BENDING AT 150,000 CYCLES OF 9.93 mm
-HARDNESS (SHORE A-15 sec): a) IN THE UPPER OF 62.8 b) IN THE OUTSOLE OF 63.5
- DENSITY IN g / cm3: a) IN THE UPPER OF 1.18 b) IN THE SOLE OF 1.12
- RESISTANCE TO THE EXTRACTION OF OILS BY SOLVENTS (UPPER AND SOLE):
A) MASS LOSS IN GASOLINE (%): a) 0.07 CANE b) 0.01 SOLE
B) LOSS OF MASS IN VEGETABLE OIL (%): a) CANE OF 0.0 b) SOLE OF 0.0
C) LOSS OF MASS IN MINERAL OIL (%): a) CANE OF 0.0 b) SOLE OF 0.0
D) LOSS OF MASS IN WATER-SOAP (%): a) CANE OF 0.0 b) SOLE OF 0.0
- AIR LEAKS: NO EVIDENCE OF AIR LEAKS
- THERMAL STABILITY: NO DEFORMATION OR APPARENT DAMAGE
- TENSION PROPERTIES FOR THE ROD:
a) ELONGATION 4.76 Mpa (Standard requirement: Min 1.5)
b) ELONGATION TO BREAKAGE (%) of 420.72 (Requirement of the standard: Min 170)
- SOLE AND UPPER ADHESION N / cm of 61.03 (Requirement of the standard No less than 30)
