10 other products:
Crossfire ES5 glasses
Designed for outdoor sports, the ES5 offers a polished look with a lightweight fit. The elegant frame provides substantial coverage for a variety of environments.
Battery RechargeBle GA73 WH Bruton O Energy Accumulator
Description
Smaller size, weight and capacity than the Impel, but with the same multi-charging functionality. USB, 12V, 16V, and 19V outputs...
Petzl Sliding Anti-Fall Brake
- Permanent protection against falls:
- Stops uncontrolled falls, slides and descents.
Product Comments
Descripción
- DESCRIPTION: PANTANERA BOOT
- GENERAL: COUNTER FOR ENHANCED PROTECTION AND EASE TO HEEL BOOT mismatching TOP OF REED WITH GROOVE SYSTEM ON BOTH SIDES FOR EASE OF GRIP
- COLOR: OF THE ASSEMBLY OF THE CANE AND THE CAPELLATION IS BLACK / THE COLOR OF THE SOLE OF THE BOOT IS BEIGE.
- HEIGHT: CORRESPONDS TO THE TYPE OF HIGH ROD BOOT WITH AVERAGE RANGE OF 359 mm.
- HEEL AND SOLE: HEEL WITH HEIGHT OF 26 mm +/- 2mm. OUTSOLE WITH A RELIEF DESIGN THAT OFFERS ANTI-SLIP EFFECT.
- CAPELLADA: REINFORCED WITH RELIEF, LIKE THE COUNTERFURT ROD: WITH TAPE IN TOP PARTS OF 2.8 mm, TO AVOID TEARING; REINFORCEMENT IN REAR OF 22.9 mm.
- DESIGN AND MATERIALS: ERGONOMIC DIRECT INJECTION PVC (polyvinyl chloride), HIGH
- RESISTANCE AND GREAT FLEXIBILITY; 100% WATERPROOF; NON-PLEATED NYLON INNER STOCKING
TECHNICAL DATA: - HEEL AND OUTSOLE WITH RESISTANCE TO 118 mm3 ABRASION - RESISTANCE TO
BENDING AT 150,000 CYCLES OF 9.93 mm
-HARDNESS (SHORE A-15 sec): a) IN THE UPPER OF 62.8 b) IN THE OUTSOLE OF 63.5
- DENSITY IN g / cm3: a) IN THE UPPER OF 1.18 b) IN THE SOLE OF 1.12
- RESISTANCE TO THE EXTRACTION OF OILS BY SOLVENTS (UPPER AND SOLE):
A) MASS LOSS IN GASOLINE (%): a) 0.07 CANE b) 0.01 SOLE
B) LOSS OF MASS IN VEGETABLE OIL (%): a) CANE OF 0.0 b) SOLE OF 0.0
C) LOSS OF MASS IN MINERAL OIL (%): a) CANE OF 0.0 b) SOLE OF 0.0
D) LOSS OF MASS IN WATER-SOAP (%): a) CANE OF 0.0 b) SOLE OF 0.0
- AIR LEAKS: NO EVIDENCE OF AIR LEAKS
- THERMAL STABILITY: NO DEFORMATION OR APPARENT DAMAGE
- TENSION PROPERTIES FOR THE ROD:
a) ELONGATION 4.76 Mpa (Standard requirement: Min 1.5)
b) ELONGATION TO BREAKAGE (%) of 420.72 (Requirement of the standard: Min 170)
- SOLE AND UPPER ADHESION N / cm of 61.03 (Requirement of the standard No less than 30)