PVC ATS 407 Boots


Qty


Descripción

1. DESCRIPTION: HIGH ROD BOOT - DIELECTRIC (Sizes 36 to 44)
2. GENERAL DATA: - REINFORCED COUNTER FOR HEEL PROTECTION AND
EASY TO REMOVE THE BOOT
- SIDE PROTECTION FOR THE ANKLES, ON BOTH SIDES, WITH
AVERAGE RANGE 3.5mm +/- 0.5mm
3. COLOR: - CANE AND CAPELLADA: BLACK, WHITE AND YELLOW.
SOLE: CREPE, WHITE AND BLACK, RESPECTIVELY.
4. HEIGHT: CORRESPONDS TO THE TYPE OF HIGH ROD BOOT WITH AVERAGE RANGE OF
335mm +/- 5mm
5. HEEL AND SOLE: HEEL WITH HEIGHT OF 40 mm +/- 3 mm. SOLE WITH DESIGN IN
RELIEF THAT OFFERS ANTI-SLIP EFFECT.
6. CAPELLADA: REINFORCED WITH RELIEF, LIKE THE COUNTERFORT
7. ROD: WITH TAPE ON TOP OF 2.8 mm IN PARTS, TO AVOID TEARING;
REINFORCEMENT IN REAR OF 22.9 mm.
8. DESIGN AND MATERIALS: ERGONOMIC DIRECT INJECTION OF PVC (polyvinyl chloride),
HIGH RESISTANCE AND GREAT FLEXIBILITY; 100% WATERPROOF;
NYLON INNER STOCKINGS WITHOUT PLEASURES. 9. TECHNICAL DATA: - HEEL / SOLE: RESISTANCE TO ABRASION OF 204 mm3
- RESISTANCE TO BENDING AT 150,000 CYCLES OF 12.6 mm
- HARDNESS (SHORE A-10 sec): a) IN THE UPPER OF 53.8 b) IN THE OUTSOLE
FROM 61.6
- AIR LEAKS: NO AIR LEAKS
10. DIELECTRICITY: - LEAKAGE CURRENT (mA): 0.544 in Voltage at 14.05 kV.
Referenced samples did NOT show disruption during application
of the test voltage and the leakage currents are less than indicated
by the technical standard in question.


Información Técnica

High boots


ATS407