English
Español CO
-
-
-
-
- Products
-
-
- Products
-
-
-
- Brands
-
-
-
-
- Products
-
-
- Doctors and Hospitals
- Products
-
-
-
-
-
- Aluminized Products
-
-
-
- Confined Spaces
- Products
-
-
10 other products:
Anti-cut Gloves For Receipt Handling TenX Threeixty Ref: 7090
Use Description: Sharps And Chemical Handling
Self-Retracting Block 6M (20Ft) In Steel Cable Ansi Z359.14-2014 Steelpro
The STEELPRO Fall Protection self-retracting line in steel cable for arresting
falls to less than 0.61 mts., allows the realization of work at heights and safe movement in vertical and...
Thermal Pants Men and Women First Layer 5.5 Ounces
Thermal Pants Men and Women First Layer 5.5 Ounces
Steelpro Aluminum Height Work Chair
Ergonomic chair with moisture repellent property.
With snap hook.
Three tool holding rings.
2 metal adjustment rings on the sides.
Jumbo Fono Padded Headband Snr 33Db Nrr 28Db Steelpro
Steelpro JUMBO line of hearing protectors designed to protect
against the daily risks produced by noise in order to avoid losses of
hearing. It is an ergonomic and dielectric hearing...
HexArmor GGT5 4021 Anti-Impact Extrication Gloves
Polyco 4021 Hexarmor Ggt5 Cut Resistance & Impact Resistance Mud High Visibility Orange Glove
Hearing Protector Headband Type Peltor Cup 3m 25 Db Optime 98 Ref H9a
- Always use protectors with clean hands.
- Put on protectors before entering the work area.
- Do not remove guards in work area.
- Follow the...
Go Gold 5.0 Polycarbonate Visor With Af Rocket
This viewfinder was designed with the purpose of protecting the face and eyes from particle projections.
Complete lateral and frontal coverage that allows a vision without optical...
Product Comments
image Featured Descripción
The Fall Protection Rebar Positioning Guard Device is perfect for work positioning applications on rebar structures. Its double legs allow workers to lean away from walls, while keeping their hands free to carry out any necessary work. To function properly, it must be used in combination with a full body harness with positioning side D-rings, so that both snap hook components can be connected correctly. This device meets ANSI-A10.32 2004 standards, which include meeting a 5,000 pound tensile strength and incorporating a grade 80, 9/32 inch or more chain. All chain assemblies are also adjustable, and a variety of connector options are available.
Characteristics:
- Allows workers to lean away from walls, keeping their hands free
- Must be accompanied by a harness with lateral positioning rings, such as the Guardian HUV-3
- Free fall must be limited to less than 2 '
