English
Español CO
-
-
-
-
- Products
-
-
- Products
-
-
-
- Brands
-
-
-
-
- Products
-
-
- Doctors and Hospitals
- Products
-
-
-
-
-
- Aluminized Products
-
-
-
- Confined Spaces
- Products
-
-
Grillon Hook Connector
Adjustable clamping lanyard with HOOK connector
The adjustable Grillon Hook lanyard is used to make hooking systems restraint as a complement to a fall arrest device. Allows you to precisely and easily adjust the necessary length, depending on the characteristics of the workplace, to position itself comfortably. His Hook connector is ideal for double use from the harness side attachment points. The grillon Hook is available in four lengths (2, 3, 4 and 5 m) and is certified according to European and Russian standards.
10 other products:
Reverse Polyvalent Descender Belay Petzl
Ultralight multipurpose belay-descender, with braking adapted to the different...
Monoglasses Top Gun Infrared Ir.5 Af Ansi Z87 +
Monolenses for visual protection in polycarbonate, used as primary protection according to OSHA recommendations. Suitable for outdoor and indoor work, designed to protect against high and low...
Phono Headband Cm502 Ce Snr 26Db
Steelpro CM model line of hearing protectors
502 C designed to protect against everyday hazards
produced by noise in order to avoid loss of
hearing. It is a dielectric hearing...
Crossfire Diamondback Glasses Clear Lens
Provides protection from bright artificial light bulbs and sunlight. Ideal for indoor and outdoor use.
Product Comments
image Featured Descripción
Lashing element with progressive regulation system that allows to precisely adjust the working position.
It is used in double, connected to the lateral attachment points of the harness to distribute the load on the belt (if the user is resting on the feet): the adjustment is carried out by activating the pivoting cam.
It can be used single, connected to the ventral attachment point of the harness to distribute the load between the waist and the thighs (if the user is in suspension): the adjustment is made by operating the handle and holding the free end of the rope (it is necessary open the appliance to remove the protective cover).
Removable protection cover to protect the rope from aggressive contact points, to facilitate its sliding.
Available in various lengths.
Certifications: CE EN 358
Reference: L52H 002
- Weight: 625 g
- Length: 2 m
Reference: L52H 003
- Weight: 735 g
- Length: 3 m
Reference: L52H 004
- Weight: 815 g
- Length: 4 m
Reference: L52H 005
- Weight: 895 g
- Length: 5 m
Made in: FR
Warranty: 3 years
Easy to use:
Progressive regulation system that allows you to precisely adjust the length necessary to position yourself comfortably in the workplace.
It is used in double from the side attachment points of the harness when the user is working on their feet. This type of connection guarantees a better distribution of the load on the harness belt. Adjustment is done by tightening the pivoting cam
Terminals Sewn on both ends with a plastic sleeve to keep the connector in position and protect the rope from abrasion.
Protection cover that protects the rope from aggressive contact points, while promoting its sliding.
The product is served with a HOOK connector suitable for using the lanyard in double from the side attachment points of the harness.
Available in four lengths: 2, 3, 4 and 5 m. Identification of the lanyard length is immediate, thanks to the colored label located on the receiving tip of the connector.
Strings available as a spare part.
Materials: polyamide, polyester and aluminum
Certifications: CE EN 358, CE EN 12841 type C, EAC
